How to Get Water Out of Your Bluetooth Speakers?

If your Bluetooth speaker has gotten wet, there are a few things you can do to try and Get Water Out of Your Bluetooth Speakers. First, if the speaker is still on, turn it off immediately. Then, remove any batteries or other external power sources.

Next, take a look at the speaker and see if there are any openings where water could have gotten in. If so, open them up and let the water drain out. Finally, dry off the speaker as much as possible with a towel or cloth.

  • Unplug your Bluetooth speaker from any power source
  • Remove the speaker’s cover, if it has one
  • Use a paper towel or soft cloth to dab at any water on the speaker’s surface
  • Do not rub the towel over the speaker, as this could damage it
  • Use a vacuum cleaner with the hose attachment to suck up any water inside the speaker
  • Be careful not to press too hard on the vacuum cleaner, as this could damage the speaker
  • Allow the speaker to dry completely before plugging it back in and using it again
How to Get Water Out of Your Bluetooth Speakers?


How Do I Get Water Out of Your Bluetooth Speakers?

If your speakers are full of water, there are a few things you can do to try and get the water out. First, you can remove the speaker covers and let them air dry. If the water is inside the speaker itself, you can try using a vacuum cleaner with a hose attachment to suck out the water.

You can also try using a hair dryer on low heat to evaporate any water inside the speaker. If none of these methods work, you may need to replace your speakers.

How Do You Fix Water Damaged Speakers?

If your speakers have been damaged by water, there are a few things you can do to try and fix them. First, if the speakers are still wet, you need to dry them off as quickly as possible. Use a soft cloth or paper towels to gently pat them dry, then set them in a warm, dry place.

If possible, blow a fan on them or put them in front of a space heater to speed up the drying process. Once they’re dried out, you can start troubleshooting the damage. If the speakers were only lightly submerged, they may just need to be dried out completely before they’ll work again.

However, if the water damage is more severe, you may need to replace some of the components inside the speaker. Start by checking for any obvious signs of damage like rust or corrosion on the metal parts. If everything looks okay there, move on to testing the electrical connections.

Use a multimeter to test for continuity between the different terminals on the speaker’s binding post. If there is no continuity or if you see any burnt-out areas on the circuit board, those will need to be replaced before your speaker will work again. Once you’ve replaced any damaged parts and made sure all the electrical connections are good, try powering up your speaker and see if it works.

In most cases, even heavily water-damaged speakers can be fixed with some patience and effort.

How Long Does It Take to Get Water Out of Your Speaker?

When you think about it, it’s really quite amazing how much water our bodies are made up of. We are literally walking around containers of water! Not to mention all the other places water can be found – in the air, in food, and even in inanimate objects like rocks.

So when you drop your phone in the toilet (it happens to the best of us!) or spill a drink on your laptop, it’s no wonder that water ends up inside your devices. But what does that mean for electronics? Can speakers get water damage?

The short answer is yes – speakers can absolutely get water damage. In fact, water is one of the most common ways that electronic devices sustained damage. Whether it’s from a spilled cup of coffee or a rainstorm, if there’s water involved there’s a chance for damage.

So how long does it take for water to actually cause problems inside a speaker? It depends on several factors, including: – The type of speaker: Some speakers are more resistant to water than others.

For example, those designed for use in bathrooms or outdoors will usually have some sort of waterproofing treatment applied to them. However, even these types of speakers aren’t 100% waterproof and can still sustain damage if they’re submerged for too long or exposed to high levels of humidity. – The amount of water: A small amount of liquid spilled on top of a speaker probably won’t do much harm (beyond maybe causing a short circuit if it gets into the wrong place).

However, if enough liquid gets inside the speaker then it could start rusting or corroding internal components. This would eventually lead to permanent damage and failure of the speaker. – The length of time: If you catch the spill quickly then there’s a good chance you’ll be able to dry out the speaker before any real damage occurs.

However, if liquids are left sitting inside the speaker for an extended period then they will have more time to cause problems. Additionally, if you turn on the speaker while it’s still wet then this could also hasten any internal corrosion since moisture + electricity = bad news.

What Happens If Water Gets in the Speaker?

If water gets into the speaker, it can cause problems. The water can shorten out the electrical components, causing the speaker to stop working. In some cases, the water can also damage the cone or other parts of the speaker.

How To Connect Your Waterproof Bluetooth Speaker

How to Get Water Out of a Phone Speaker

If your phone speaker is sounding a little muffled, there could be water trapped inside it. Here’s how to get rid of that water so your speaker will sound clear again. First, remove the back cover of your phone and take out the battery.

Next, use a small Phillips screwdriver to remove the four screws holding the speaker in place. Be careful not to lose any of the screws! Once the speaker is removed, hold it up to a light and look for any water droplets inside.

If you see any, use a can of compressed air or a vacuum cleaner with the hose attachment to suck out the moisture. Finally, reassemble your phone and test the speaker by playing some music or making a call. If it sounds good as new, then you’re all set!

But if not, you may need to replace the speaker entirely.


If you’re like most people, you probably use your Bluetooth speakers near water sources like pools, lakes, and oceans. And while most speakers are designed to be waterproof, they can still get water inside them. So what do you do when your speaker gets wet?

Here’s a step-by-step guide to getting water out of your Bluetooth speaker: 1. Turn off the speaker and remove the battery (if possible). 2. Open up the speaker so that you can access the internals.

3. Use a hairdryer on low heat to dry out the internals of the speaker. Be sure not to hold the hairdryer too close to any sensitive electronic components. 4. Once the internals are dry, reassemble the speaker and test it out.

If it doesn’t work, repeat steps 2-4 until it does.

Similar Posts